Double row full complement cylindrical roller bearings incorporate a maximum number of rollers and are therefore suitable for very heavy radial loads in combination with moderate speeds. Having three flanges on the inner ring and one flange on the outer ring, NNCF design bearings can accommodate limited axial displacement in one direction. A retaining ring in the outer ring holds the bearing together. The retaining ring should not be loaded axially during operation.
| d |
360 mm
|
Bore diameter |
|---|---|---|
| D |
540 mm
|
Outside diameter |
| B |
243 mm
|
Width |
| d1 |
≈ 412 mm
|
Shoulder diameter inner ring |
| D1 |
≈ 486 mm
|
Shoulder diameter outer ring |
| K |
5 mm
|
Diameter lubrication hole (outer ring) |
| s |
max. 11 mm
|
Permissible axial displacement from the normal position of one bearing ring relative to the other |
| r1,2 |
min. 5 mm
|
Chamfer dimension (open bearings) |
| r3,4 |
min. 5 mm
|
Chamfer dimension |
| da |
min. 383 mm
|
Abutment diameter shaft |
|---|---|---|
| das |
402 mm
|
Abutment diameter shaft |
| Da |
max. 519 mm
|
Abutment diameter housing |
| ra |
max. 4 mm
|
Fillet radius |
| rb |
max. 4 mm
|
Fillet radius |
| Basic dynamic load rating | C |
4 180 kN
|
|---|---|---|
| Basic static load rating | C0 |
8 650 kN
|
| Fatigue load limit | Pu |
735 kN
|
| Reference speed |
500 r/min
|
|
| Limiting speed |
630 r/min
|
|
| Minimum load factor | kr |
0.5
|
| Mass bearing |
195 kg
|
Reviews
There are no reviews yet.