Single direction thrust ball bearings can accommodate axial loads in one direction. They must not be subjected to any radial load. Their separable components facilitate mounting/dismounting and maintenance inspections. Many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit.
| d |
1 120 mm
|
Bore diameter |
|---|---|---|
| D |
1 320 mm
|
Outside diameter |
| H |
160 mm
|
Height |
| d1 |
≈ 1 315 mm
|
Outside diameter shaft washer |
| D1 |
≈ 1 125 mm
|
Inner diameter housing washer |
| r1,2 |
min. 5 mm
|
Chamfer dimension washer |
| da |
min. 1 240 mm
|
Abutment diameter shaft |
|---|---|---|
| Da |
max. 1 200 mm
|
Abutment diameter housing |
| ra |
max. 4 mm
|
Fillet radius |
| Basic dynamic load rating | C |
1 530 kN
|
|---|---|---|
| Basic static load rating | C0 |
16 300 kN
|
| Fatigue load limit | Pu |
173 kN
|
| Reference speed |
220 r/min
|
|
| Limiting speed |
320 r/min
|
|
| Minimum load factor | A |
1 400
|
| Mass bearing (including seat washer where applicable) |
395 kg
|
Reviews
There are no reviews yet.