W lock washers are locking devices, used to secure AN and N lock nuts onto a shaft or adapter sleeve and prevent unintentional loosening. The lock washers engage a keyway in the shaft or adapter sleeve thread. They lock the nut in position when one of the washer tabs is bent into one of the slots in the outside diameter of the lock nut. A new lock washer should be used each time the corresponding lock nut is installed.
| d |
151.968 mm
|
Bore diameter |
|---|---|---|
| d1 |
180.162 mm
|
Side face diameter |
| d2 |
204.8 mm
|
Outside diameter over tabs |
| B |
3.708 mm
|
Thickness material |
| f |
14.986 mm
|
Width inner tab |
| M |
145.542 mm
|
Inside dimension under inner tab |
| V |
7.95 mm
|
Projection of key tang |
| Mass lock washer |
0.34 kg
|
Reviews
There are no reviews yet.