W lock washers are locking devices, used to secure AN and N lock nuts onto a shaft or adapter sleeve and prevent unintentional loosening. The lock washers engage a keyway in the shaft or adapter sleeve thread. They lock the nut in position when one of the washer tabs is bent into one of the slots in the outside diameter of the lock nut. A new lock washer should be used each time the corresponding lock nut is installed.
| d |
111.633 mm
|
Bore diameter |
|---|---|---|
| d1 |
134.899 mm
|
Side face diameter |
| d2 |
154 mm
|
Outside diameter over tabs |
| B |
2.921 mm
|
Thickness material |
| f |
8.966 mm
|
Width inner tab |
| M |
106.299 mm
|
Inside dimension under inner tab |
| V |
6.35 mm
|
Projection of key tang |
| Mass lock washer |
0.16 kg
|
Reviews
There are no reviews yet.