W lock washers are locking devices, used to secure AN and N lock nuts onto a shaft or adapter sleeve and prevent unintentional loosening. The lock washers engage a keyway in the shaft or adapter sleeve thread. They lock the nut in position when one of the washer tabs is bent into one of the slots in the outside diameter of the lock nut. A new lock washer should be used each time the corresponding lock nut is installed.
| d |
80.696 mm
|
Bore diameter |
|---|---|---|
| d1 |
98.4 mm
|
Side face diameter |
| d2 |
111.125 mm
|
Outside diameter over tabs |
| B |
1.575 mm
|
Thickness material |
| f |
8.966 mm
|
Width inner tab |
| M |
77.165 mm
|
Inside dimension under inner tab |
| V |
4.775 mm
|
Projection of key tang |
| Mass lock washer |
0.045 kg
|
Reviews
There are no reviews yet.