W lock washers are locking devices, used to secure AN and N lock nuts onto a shaft or adapter sleeve and prevent unintentional loosening. The lock washers engage a keyway in the shaft or adapter sleeve thread. They lock the nut in position when one of the washer tabs is bent into one of the slots in the outside diameter of the lock nut. A new lock washer should be used each time the corresponding lock nut is installed.
| d |
30.302 mm
|
Bore diameter |
|---|---|---|
| d1 |
38.862 mm
|
Side face diameter |
| d2 |
48.819 mm
|
Outside diameter over tabs |
| B |
1.016 mm
|
Thickness material |
| f |
4.47 mm
|
Width inner tab |
| M |
27.762 mm
|
Inside dimension under inner tab |
| V |
2.388 mm
|
Projection of key tang |
| Mass lock washer |
0.007 kg
|
Reviews
There are no reviews yet.