Double row full complement cylindrical roller bearings incorporate a maximum number of rollers and are therefore suitable for very heavy radial loads in combination with moderate speeds. Having three flanges on the inner ring and one flange on the outer ring, NNCF design bearings can accommodate limited axial displacement in one direction. A retaining ring in the outer ring holds the bearing together. The retaining ring should not be loaded axially during operation.
| d |
80 mm
|
Bore diameter |
|---|---|---|
| D |
125 mm
|
Outside diameter |
| B |
60 mm
|
Width |
| d1 |
≈ 95 mm
|
Shoulder diameter inner ring |
| D1 |
≈ 111 mm
|
Shoulder diameter outer ring |
| b1 |
5 mm
|
Width annular lubrication groove outer ring |
| K |
3.5 mm
|
Diameter lubrication hole (outer ring) |
| s |
max. 3.5 mm
|
Permissible axial displacement from the normal position of one bearing ring relative to the other |
| r1,2 |
min. 1.1 mm
|
Chamfer dimension (open bearings) |
| r3,4 |
min. 0.6 mm
|
Chamfer dimension |
|
Parameter r3.4 has either the value specified here or the same value as r1.2.
|
| da |
min. 86 mm
|
Abutment diameter shaft |
|---|---|---|
| das |
91 mm
|
Abutment diameter shaft |
| Da |
max. 119 mm
|
Abutment diameter housing |
| ra |
max. 1 mm
|
Fillet radius |
| rb |
max. 0.5 mm
|
Fillet radius |
| Basic dynamic load rating | C |
308 kN
|
|---|---|---|
| Basic static load rating | C0 |
455 kN
|
| Fatigue load limit | Pu |
58.5 kN
|
| Reference speed |
2 400 r/min
|
|
| Limiting speed |
3 000 r/min
|
|
| Minimum load factor | kr |
0.5
|
| Mass bearing |
2.59 kg
|
Reviews
There are no reviews yet.