Single row tapered roller bearings are designed to accommodate combined radial and axial loads and provide low friction during operation. The inner ring, with rollers and cage, can be mounted separately from the outer ring. These separable and interchangeable components facilitate mounting, dismounting and maintenance. By mounting one single row tapered roller bearing against another and applying a preload, a rigid bearing application can be achieved.
| Dimension series |
4GD
|
| d |
300 mm
|
Bore diameter |
|---|---|---|
| D |
460 mm
|
Outside diameter |
| T |
100 mm
|
Total width |
| d1 |
≈ 377.3 mm
|
Shoulder diameter of inner ring |
| B |
100 mm
|
Width of inner ring |
| C |
74 mm
|
Width of outer ring |
| r1,2 |
min. 5 mm
|
Chamfer dimension of inner ring |
| r3,4 |
min. 4 mm
|
Chamfer dimension of outer ring |
| a |
97 mm
|
Distance side face to pressure point |
| da |
max. 330 mm
|
Diameter of shaft abutment |
|---|---|---|
| db |
min. 322 mm
|
Diameter of shaft abutment |
| Da |
min. 404 mm
|
Diameter of housing abutment |
| Da |
max. 440 mm
|
Diameter of housing abutment |
| Db |
min. 439 mm
|
Diameter of housing abutment |
| Ca |
min. 10 mm
|
Minimum width of space required in housing on large side face |
| Cb |
min. 26 mm
|
Minimum width of space required in housing on small side face |
| ra |
max. 4 mm
|
Radius of shaft fillet |
| rb |
max. 3 mm
|
Radius of housing fillet |
| Basic dynamic load rating | C |
1 644 kN
|
|---|---|---|
| Basic static load rating | C0 |
3 000 kN
|
| Fatigue load limit | Pu |
245 kN
|
| Reference speed |
900 r/min
|
|
| Limiting speed |
1 200 r/min
|
|
| Limiting value | e |
0.43
|
| Calculation factor | Y |
1.4
|
| Calculation factor | Y0 |
0.8
|
| Mass |
57.9 kg
|
Reviews
There are no reviews yet.