M1 AC Drive, 3.7kW (HD), 17.5 A (HD), 200 VAC, 1~ input, OLV/CLV control, EtherCAT, STO (FSoE + wired), max. output freq. 590Hz EtherCAT version.
| Drive control method | Closed loop V/f, Closed loop vector, Open loop V/f, Open loop vector, V/f control, Vector control |
| Drive supply voltage | 230 V single phase |
| Max. motor output at constant torque (HD) | 3.7 kW |
| Built in EMC filter | ❌ |
| Degree of protection (IP) | IP20 |
| Compatible motor type | Induction or asynchronous motor, Permanent magnet motor |
| Communication port(s) | EtherCAT Slave, USB |
| Product Height (unpacked) | 220 mm |
| Product Width (unpacked) | 180 mm |
| Product Depth (unpacked) | 171 mm |
| Product Weight (unpacked) | 3800 g |
| Finless type | ❌ |
| AX-FER2815-PE | Ferrite choke, 28mm diameter, for 15kW inverters and below |
|
|
| AX-FIC1045-SE | M1 Series RFI filter 45 A, 200 VAC, single phase. |
|
|
| AX-FIC1045-SE-LL | Low Leakage M1 Series RFI filter 45 A, 200 VAC, single phase. |
|
|
| AX-RAI00210330-DE | AC input reactor, 33 A, 0.21 mH, for 5.5 to 7.5 kW sizes, 200 VAC, 3 phase |
|
|
| AX-RAO01150220-DE | AC output reactor, 22 A, 1.15 mH, for 5.5 kW, 200 VAC, 3 phase |
|
|
| AX-RC01110309-DE | DC link reactor, 30.9 A, 1.11 mH, for 5.5 kW, 200 VAC |
|
|
| AX-REM00K4040-IE | Braking resistor, 400 W, 40 ohm nominal |
|
|
| AX-REM00K4050-IE | Braking resistor, 400 W, 50 ohm nominal |
|
|
| AX-REM00K6050-IE | Braking resistor, 600 W, 50 ohm nominal |
|
Datasheet
EN PDF
Datasheet
EN PDF
Reviews
There are no reviews yet.