Four-point contact ball bearings can accommodate radial, axial and moment loads simultaneously. One bearing series is based on a single cross section which remains constant as the bore diameter increases, leading to significant space and weight savings. The bearings are available with metric or inch main dimensions. Depending on the design and series the bearings can be provided with chemical and corrosion resistance.
| d |
250 mm
|
Bore diameter |
|---|---|---|
| D |
290 mm
|
Outside diameter |
| H |
20 mm
|
Radial cross section |
| B |
19.99 mm
|
Width |
| d1 |
≈ 265 mm
|
Shoulder diameter inner ring |
| D1 |
≈ 275 mm
|
Shoulder diameter outer ring |
|
9.525 mm
|
Ball diameter | |
|
1.5 mm
|
Maximum radius of shaft or housing fillet |
| Dynamic load rating, Kaydon, radial direction | CK |
36.6 kN
|
|---|---|---|
| Basic static load rating, radial direction | C0 |
59.9 kN
|
| Basic static load rating, axial direction | C0a |
150 kN
|
| Basic dynamic load rating, moment | CM |
3.706 kN·m
|
| Basic static load rating, moment | C0M |
8.087 kN·m
|
| Mass bearing |
≈ 2.1 kg
|
Reviews
There are no reviews yet.