These angular contact ball bearings can accommodate radial and axial loads acting simultaneously, where the axial load acts in only one direction. One bearing series is based on a single cross section which remains constant as the bore diameter increases, leading to significant space and weight savings. The bearings are available with metric and inch boundary dimensions. Depending on the design and series, the bearings can be provided with chemical and corrosion resistance.
| d |
190 mm
|
Bore diameter |
|---|---|---|
| D |
216 mm
|
Outside diameter |
| H |
13 mm
|
Radial cross section |
| B |
13 mm
|
Width |
| d1 |
≈ 199.7 mm
|
Shoulder diameter inner ring |
| D1 |
≈ 206.3 mm
|
Shoulder diameter outer ring |
| D4 |
≈ 209.5 mm
|
Shoulder diameter outer ring |
|
6.35 mm
|
Ball diameter | |
|
1.5 mm
|
Maximum radius of shaft or housing fillet |
| Dynamic load rating, Kaydon, radial direction | CK |
13.9 kN
|
|---|---|---|
| Basic static load rating, radial direction | C0 |
34.6 kN
|
| Basic static load rating, axial direction | C0a |
99.8 kN
|
| Mass bearing |
≈ 0.59 kg
|
Reviews
There are no reviews yet.