Matched tapered roller bearings arranged back-to-back (O-arrangement, load lines diverge towards the bearing axis) accommodate high radial loads, axial loads in both directions, and tilting moments. The precision manufactured intermediate rings between the innner and outer rings enable a defined internal clearance or preload to be achieved when mounted. Matched tapered roller bearings are typically used in gearboxes, hoisting equipment, rolling mills, and machines in the mining industry.
| SKF performance class |
SKF Explorer
|
| d |
120 mm
|
Bore diameter |
|---|---|---|
| D |
215 mm
|
Outside diameter |
| T |
137 mm
|
Total width |
| d1 |
≈ 164.37 mm
|
Shoulder diameter of inner ring |
| C |
114 mm
|
Width of outer rings |
| l |
14 mm
|
Width of spacer ring |
| K |
0 mm
|
Diameter of lubrication hole |
| r1,2 |
min. 3 mm
|
Chamfer dimension |
| r5 |
min. 1 mm
|
Chamfer dimension |
| db |
min. 134 mm
|
Diameter of shaft abutment |
|---|---|---|
| Db |
min. 204 mm
|
Diameter of shaft abutment |
| Cb |
min. 11.5 mm
|
Minimum width of space required in housing on small side face |
| ra |
max. 3 mm
|
Radius of fillet |
| rc |
max. 1 mm
|
Radius of fillet |
| Basic dynamic load rating | C |
983 kN
|
|---|---|---|
| Basic static load rating | C0 |
1 400 kN
|
| Fatigue load limit | Pu |
143 kN
|
| Reference speed |
2 000 r/min
|
|
| Limiting speed |
3 000 r/min
|
|
| Limiting value | e |
0.43
|
| Calculation factor | Y1 |
1.6
|
| Calculation factor | Y2 |
2.3
|
| Calculation factor | Y0 |
1.6
|
| Mass |
19.4 kg
|
Reviews
There are no reviews yet.