Matched tapered roller bearings arranged back-to-back (O-arrangement, load lines diverge towards the bearing axis) accommodate high radial loads, axial loads in both directions, and tilting moments. The precision manufactured intermediate rings between the innner and outer rings enable a defined internal clearance or preload to be achieved when mounted. Matched tapered roller bearings are typically used in gearboxes, hoisting equipment, rolling mills, and machines in the mining industry.
| d |
100 mm
|
Bore diameter |
|---|---|---|
| D |
215 mm
|
Outside diameter |
| T |
125 mm
|
Total width |
| d1 |
≈ 158.61 mm
|
Shoulder diameter of inner ring |
| C |
82 mm
|
Width of outer rings |
| l |
12 mm
|
Width of spacer ring |
| b |
6 mm
|
Width of lubrication groove |
| K |
3 mm
|
Diameter of lubrication hole |
| r1,2 |
min. 4 mm
|
Chamfer dimension |
| r5 |
min. 1 mm
|
Chamfer dimension |
| a |
141.905 mm
|
Distance between pressure points |
| db |
min. 116 mm
|
Diameter of shaft abutment |
|---|---|---|
| Db |
min. 202 mm
|
Diameter of shaft abutment |
| Cb |
min. 21.5 mm
|
Minimum width of space required in housing on small side face |
| ra |
max. 4 mm
|
Radius of fillet |
| rc |
max. 1 mm
|
Radius of fillet |
| Basic dynamic load rating | C |
685 kN
|
|---|---|---|
| Basic static load rating | C0 |
930 kN
|
| Fatigue load limit | Pu |
102 kN
|
| Reference speed |
1 700 r/min
|
|
| Limiting speed |
3 000 r/min
|
|
| Limiting value | e |
0.83
|
| Calculation factor | Y1 |
0.81
|
| Calculation factor | Y2 |
1.2
|
| Calculation factor | Y0 |
0.8
|
| Mass |
18.8 kg
|
Reviews
There are no reviews yet.