Single row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and no flanges on the inner ring, NU design bearings can accommodate axial displacement in both directions. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged.
| d |
600 mm
|
Bore diameter |
|---|---|---|
| D |
870 mm
|
Outside diameter |
| B |
155 mm
|
Width |
| D1 |
≈ 793 mm
|
Shoulder diameter of outer ring |
| F |
661 mm
|
Raceway diameter of inner ring |
| r1,2 |
min. 6 mm
|
Chamfer dimension |
| s |
max. 6.1 mm
|
Permissible axial displacement |
| da |
min. 623 mm
|
Diameter of spacer sleeve |
|---|---|---|
| da |
max. 652 mm
|
Diameter of spacer sleeve |
| db |
min. 667 mm
|
Diameter of shaft abutment |
| Da |
max. 847 mm
|
Diameter of housing abutment |
| ra |
max. 5 mm
|
Radius of fillet |
| Basic dynamic load rating | C |
4 180 kN
|
|---|---|---|
| Basic static load rating | C0 |
8 000 kN
|
| Fatigue load limit | Pu |
570 kN
|
| Reference speed |
600 r/min
|
|
| Limiting speed |
900 r/min
|
|
| Minimum load factor | kr |
0.14
|
| Limiting value | e |
0.3
|
| Calculation factor | Y |
0
|
| Mass |
325 kg
|
Reviews
There are no reviews yet.