Single row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and no flanges on the inner ring, NU design bearings can accommodate axial displacement in both directions. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged.
| d |
530 mm
|
Bore diameter |
|---|---|---|
| D |
780 mm
|
Outside diameter |
| B |
112 mm
|
Width |
| D1 |
≈ 692 mm
|
Shoulder diameter of outer ring |
| F |
593 mm
|
Raceway diameter of inner ring |
| r1,2 |
min. 6 mm
|
Chamfer dimension |
| s |
max. 10.4 mm
|
Permissible axial displacement |
| da |
min. 553 mm
|
Diameter of spacer sleeve |
|---|---|---|
| da |
max. 585 mm
|
Diameter of spacer sleeve |
| db |
min. 598 mm
|
Diameter of shaft abutment |
| Da |
max. 757 mm
|
Diameter of housing abutment |
| ra |
max. 5 mm
|
Radius of fillet |
| Basic dynamic load rating | C |
2 290 kN
|
|---|---|---|
| Basic static load rating | C0 |
4 050 kN
|
| Fatigue load limit | Pu |
305 kN
|
| Reference speed |
800 r/min
|
|
| Limiting speed |
1 000 r/min
|
|
| Minimum load factor | kr |
0.15
|
| Limiting value | e |
0.2
|
| Calculation factor | Y |
0
|
| Mass |
190 kg
|
Reviews
There are no reviews yet.