Single row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and one on the inner ring, NJ design bearings can accommodate axial displacement in one direction. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged.
| d |
380 mm
|
Bore diameter |
|---|---|---|
| D |
560 mm
|
Outside diameter |
| B |
82 mm
|
Width |
| d1 |
≈ 443 mm
|
Shoulder diameter of inner ring |
| D1 |
≈ 495 mm
|
Shoulder diameter of outer ring |
| F |
425 mm
|
Raceway diameter of inner ring |
| r1,2 |
min. 5 mm
|
Chamfer dimension |
| s |
max. 10.8 mm
|
Permissible axial displacement |
| da |
min. 398 mm
|
Diameter of spacer sleeve |
|---|---|---|
| da |
max. 420 mm
|
Diameter of spacer sleeve |
| db |
min. 448 mm
|
Diameter of shaft abutment |
| Da |
max. 542 mm
|
Diameter of housing abutment |
| ra |
max. 4 mm
|
Radius of fillet |
| Basic dynamic load rating | C |
1 140 kN
|
|---|---|---|
| Basic static load rating | C0 |
1 930 kN
|
| Fatigue load limit | Pu |
170 kN
|
| Reference speed |
1 200 r/min
|
|
| Limiting speed |
1 600 r/min
|
|
| Minimum load factor | kr |
0.15
|
| Limiting value | e |
0.2
|
| Calculation factor | Y |
0.6
|
| Mass |
71 kg
|
Reviews
There are no reviews yet.