Single row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and no flanges on the inner ring, NU design bearings can accommodate axial displacement in both directions. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged.
| d |
340 mm
|
Bore diameter |
|---|---|---|
| D |
520 mm
|
Outside diameter |
| B |
133 mm
|
Width |
| D1 |
≈ 465 mm
|
Shoulder diameter of outer ring |
| F |
385 mm
|
Raceway diameter of inner ring |
| r1,2 |
min. 5 mm
|
Chamfer dimension |
| s |
max. 7 mm
|
Permissible axial displacement |
| da |
min. 360 mm
|
Diameter of spacer sleeve |
|---|---|---|
| da |
max. 380 mm
|
Diameter of spacer sleeve |
| db |
min. 389 mm
|
Diameter of shaft abutment |
| Da |
max. 502 mm
|
Diameter of housing abutment |
| ra |
max. 4 mm
|
Radius of fillet |
| ra |
max. 4 mm
|
Radius of fillet |
| rb |
max. 4 mm
|
Radius of fillet |
| Basic dynamic load rating | C |
2 200 kN
|
|---|---|---|
| Basic static load rating | C0 |
4 150 kN
|
| Fatigue load limit | Pu |
365 kN
|
| Reference speed |
1 100 r/min
|
|
| Limiting speed |
1 700 r/min
|
|
| Minimum load factor | kr |
0.15
|
| Limiting value | e |
0.3
|
| Calculation factor | Y |
0.4
|
| Mass |
109 kg
|
Reviews
There are no reviews yet.