Single row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and one on the inner ring, NJ design bearings can accommodate axial displacement in one direction. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged.
| d |
340 mm
|
Bore diameter |
|---|---|---|
| D |
460 mm
|
Outside diameter |
| B |
72 mm
|
Width |
| d1 |
≈ 377 mm
|
Shoulder diameter of inner ring |
| D1 |
≈ 421 mm
|
Shoulder diameter of outer ring |
| F |
367 mm
|
Raceway diameter of inner ring |
| r1,2 |
min. 3 mm
|
Chamfer dimension |
| s |
max. 3.8 mm
|
Permissible axial displacement |
| da |
min. 353 mm
|
Diameter of spacer sleeve |
|---|---|---|
| da |
max. 363 mm
|
Diameter of spacer sleeve |
| db |
min. 381 mm
|
Diameter of shaft abutment |
| Da |
max. 447 mm
|
Diameter of housing abutment |
| ra |
max. 2.5 mm
|
Radius of fillet |
| Basic dynamic load rating | C |
1 020 kN
|
|---|---|---|
| Basic static load rating | C0 |
2 040 kN
|
| Fatigue load limit | Pu |
186 kN
|
| Reference speed |
1 400 r/min
|
|
| Limiting speed |
1 900 r/min
|
|
| Minimum load factor | kr |
0.07
|
| Limiting value | e |
0.3
|
| Calculation factor | Y |
0.4
|
| Mass |
37 kg
|
Reviews
There are no reviews yet.