Single row tapered roller bearings, inch sizes, are designed to accommodate combined radial and axial loads and provide low friction during operation. The inner ring, with rollers and cage, can be mounted separately from the outer ring. These separable and interchangeable components facilitate mounting, dismounting and maintenance. By mounting one single row tapered roller bearing against another and applying a preload, a rigid bearing application can be achieved.
| Dimension series |
L 865500
|
| d |
381 mm
|
Bore diameter |
|---|---|---|
| D |
479.425 mm
|
Outside diameter |
| T |
49.213 mm
|
Total width |
| d1 |
≈ 430.9 mm
|
Shoulder diameter of inner ring |
| B |
47.625 mm
|
Width of inner ring |
| C |
34.925 mm
|
Width of outer ring |
| r1,2 |
min. 6.4 mm
|
Chamfer dimension of inner ring |
| r3,4 |
min. 3.3 mm
|
Chamfer dimension of outer ring |
| a |
92 mm
|
Distance side face to pressure point |
| da |
max. 406 mm
|
Diameter of shaft abutment |
|---|---|---|
| db |
min. 413 mm
|
Diameter of shaft abutment |
| Da |
min. 448 mm
|
Diameter of housing abutment |
| Da |
max. 462 mm
|
Diameter of housing abutment |
| Db |
min. 463 mm
|
Diameter of housing abutment |
| Ca |
min. 6 mm
|
Minimum width of space required in housing on large side face |
| Cb |
min. 14 mm
|
Minimum width of space required in housing on small side face |
| ra |
max. 6 mm
|
Radius of shaft fillet |
| rb |
max. 3.1 mm
|
Radius of housing fillet |
| Basic dynamic load rating | C |
638 kN
|
|---|---|---|
| Basic static load rating | C0 |
1 500 kN
|
| Fatigue load limit | Pu |
120 kN
|
| Reference speed |
800 r/min
|
|
| Limiting speed |
1 100 r/min
|
|
| Limiting value | e |
0.5
|
| Calculation factor | Y |
1.2
|
| Calculation factor | Y0 |
0.7
|
| Mass |
20 kg
|
Reviews
There are no reviews yet.