Single row tapered roller bearings, inch sizes, are designed to accommodate combined radial and axial loads and provide low friction during operation. The inner ring, with rollers and cage, can be mounted separately from the outer ring. These separable and interchangeable components facilitate mounting, dismounting and maintenance. By mounting one single row tapered roller bearing against another and applying a preload, a rigid bearing application can be achieved.
| Dimension series |
LM 567900
|
| d |
406.4 mm
|
Bore diameter |
|---|---|---|
| D |
549.275 mm
|
Outside diameter |
| T |
85.725 mm
|
Total width |
| d1 |
≈ 473.516 mm
|
Shoulder diameter of inner ring |
| B |
84.138 mm
|
Width of inner ring |
| C |
61.612 mm
|
Width of outer ring |
| r1,2 |
min. 6.4 mm
|
Chamfer dimension of inner ring |
| r3,4 |
min. 3.3 mm
|
Chamfer dimension of outer ring |
| a |
100 mm
|
Distance side face to pressure point |
| da |
max. 434 mm
|
Diameter of shaft abutment |
|---|---|---|
| db |
min. 438 mm
|
Diameter of shaft abutment |
| Da |
min. 502 mm
|
Diameter of housing abutment |
| Da |
max. 532 mm
|
Diameter of housing abutment |
| Db |
min. 526 mm
|
Diameter of housing abutment |
| Ca |
min. 9 mm
|
Minimum width of space required in housing on large side face |
| Cb |
min. 23.5 mm
|
Minimum width of space required in housing on small side face |
| ra |
max. 6 mm
|
Radius of shaft fillet |
| rb |
max. 3.1 mm
|
Radius of housing fillet |
| Basic dynamic load rating | C |
1 467 kN
|
|---|---|---|
| Basic static load rating | C0 |
3 050 kN
|
| Fatigue load limit | Pu |
236 kN
|
| Reference speed |
700 r/min
|
|
| Limiting speed |
950 r/min
|
|
| Limiting value | e |
0.4
|
| Calculation factor | Y |
1.5
|
| Calculation factor | Y0 |
0.8
|
| Mass |
53.5 kg
|
Reviews
There are no reviews yet.