Single row tapered roller bearings, inch sizes, are designed to accommodate combined radial and axial loads and provide low friction during operation. The inner ring, with rollers and cage, can be mounted separately from the outer ring. These separable and interchangeable components facilitate mounting, dismounting and maintenance. By mounting one single row tapered roller bearing against another and applying a preload, a rigid bearing application can be achieved.
| Dimension series |
L 476500
|
| d |
549.199 mm
|
Bore diameter |
|---|---|---|
| D |
692.15 mm
|
Outside diameter |
| T |
80.963 mm
|
Total width |
| d1 |
≈ 615.5 mm
|
Shoulder diameter of inner ring |
| B |
80.963 mm
|
Width of inner ring |
| C |
61.913 mm
|
Width of outer ring |
| r1,2 |
min. 6.4 mm
|
Chamfer dimension of inner ring |
| r3,4 |
min. 6.4 mm
|
Chamfer dimension of outer ring |
| a |
113 mm
|
Distance side face to pressure point |
| da |
max. 583 mm
|
Diameter of shaft abutment |
|---|---|---|
| db |
min. 581 mm
|
Diameter of shaft abutment |
| Da |
min. 646 mm
|
Diameter of housing abutment |
| Da |
max. 660 mm
|
Diameter of housing abutment |
| Db |
min. 667 mm
|
Diameter of housing abutment |
| Ca |
min. 13 mm
|
Minimum width of space required in housing on large side face |
| Cb |
min. 19 mm
|
Minimum width of space required in housing on small side face |
| ra |
max. 6 mm
|
Radius of shaft fillet |
| rb |
max. 6 mm
|
Radius of housing fillet |
| Basic dynamic load rating | C |
1 340 kN
|
|---|---|---|
| Basic static load rating | C0 |
3 450 kN
|
| Fatigue load limit | Pu |
255 kN
|
| Reference speed |
530 r/min
|
|
| Limiting speed |
1 100 r/min
|
|
| Limiting value | e |
0.37
|
| Calculation factor | Y |
1.6
|
| Calculation factor | Y0 |
0.9
|
| Mass |
67 kg
|
Reviews
There are no reviews yet.