Single row tapered roller bearings are designed to accommodate combined radial and axial loads and provide low friction during operation. The inner ring, with rollers and cage, can be mounted separately from the outer ring. These separable and interchangeable components facilitate mounting, dismounting and maintenance. By mounting one single row tapered roller bearing against another and applying a preload, a rigid bearing application can be achieved.
| Dimension series |
4GD
|
| d |
220 mm
|
Bore diameter |
|---|---|---|
| D |
400 mm
|
Outside diameter |
| T |
114 mm
|
Total width |
| d1 |
≈ 306 mm
|
Shoulder diameter of inner ring |
| B |
108 mm
|
Width of inner ring |
| C |
90 mm
|
Width of outer ring |
| r1,2 |
min. 5 mm
|
Chamfer dimension of inner ring |
| r3,4 |
min. 4 mm
|
Chamfer dimension of outer ring |
| a |
95.132 mm
|
Distance side face to pressure point |
| da |
max. 253 mm
|
Diameter of shaft abutment |
|---|---|---|
| db |
min. 240.5 mm
|
Diameter of shaft abutment |
| Da |
min. 334 mm
|
Diameter of housing abutment |
| Da |
max. 382.5 mm
|
Diameter of housing abutment |
| Db |
min. 379 mm
|
Diameter of housing abutment |
| Ca |
min. 13 mm
|
Minimum width of space required in housing on large side face |
| Cb |
min. 24 mm
|
Minimum width of space required in housing on small side face |
| ra |
max. 5 mm
|
Radius of shaft fillet |
| rb |
max. 4 mm
|
Radius of housing fillet |
| Basic dynamic load rating | C |
1 720 kN
|
|---|---|---|
| Basic static load rating | C0 |
2 700 kN
|
| Fatigue load limit | Pu |
232 kN
|
| Reference speed |
1 100 r/min
|
|
| Limiting speed |
1 500 r/min
|
|
| Limiting value | e |
0.43
|
| Calculation factor | Y |
1.4
|
| Calculation factor | Y0 |
0.8
|
| Mass |
59.7 kg
|
Reviews
There are no reviews yet.