HM lock nuts are used to locate bearings onto a shaft. They have metric trapezoidal threads and eight equally spaced slots located around their circumference to accommodate an impact spanner. They should be locked by a locking clip to prevent unintentional loosening. HM lock nuts can be reused, provided they are not damaged.
| G |
Tr 750×7
|
Thread |
|---|---|---|
| d3 |
950 mm
|
Outside diameter |
| B |
112 mm
|
Width |
| d1 |
875 mm
|
Diameter locating side face |
| d2 |
813 mm
|
Pitch diameter threaded holes for locking clip |
| B5 |
139 mm
|
Width including locking clip |
| b |
60 mm
|
Width locating slot |
| h |
34 mm
|
Depth locating slot |
| Mass lock nut |
217 kg
|
| Associated spanner |
TMFN 600-750
|
| Associated eyebolt for handling |
M 16
|
Reviews
There are no reviews yet.