HM lock nuts are used to locate bearings onto a shaft. They have metric trapezoidal threads and eight equally spaced slots located around their circumference to accommodate an impact spanner. They should be locked by a locking clip to prevent unintentional loosening. HM lock nuts can be reused, provided they are not damaged.
| G |
Tr 710×7
|
Thread |
|---|---|---|
| d3 |
900 mm
|
Outside diameter |
| B |
106 mm
|
Width |
| d1 |
825 mm
|
Diameter locating side face |
| d2 |
772 mm
|
Pitch diameter threaded holes for locking clip |
| B5 |
133 mm
|
Width including locking clip |
| b |
55 mm
|
Width locating slot |
| h |
30 mm
|
Depth locating slot |
| Mass lock nut |
185 kg
|
| Associated spanner |
TMFN 600-750
|
| Associated eyebolt for handling |
M 16
|
| Locking device | MS 31/710 |
Reviews
There are no reviews yet.