KM and KML lock nuts are used to locate bearings onto a shaft. They have metric threads and four equally spaced slots located around their circumference to accommodate a spanner. They should be locked by a lock washer to prevent unintentional loosening. KM and KML lock nuts can be reused, provided they are not damaged.
| G |
M155x3
|
Thread |
|---|---|---|
| d3 |
200 mm
|
Outside diameter |
| B |
25 mm
|
Width |
| d1 |
182 mm
|
Diameter locating side face |
| b |
16 mm
|
Width locating slot |
| h |
7 mm
|
Depth locating slot |
| Axial static load carrying capacity |
540 kN
|
| Mass lock nut |
2.4 kg
|
| Associated spanner |
2 x TMFN 30-40
|
Reviews
There are no reviews yet.