KM and KML lock nuts are used to locate bearings onto a shaft. They have metric threads and four equally spaced slots located around their circumference to accommodate a spanner. They should be locked by a lock washer to prevent unintentional loosening. KM and KML lock nuts can be reused, provided they are not damaged.
| G |
M135x2
|
Thread |
|---|---|---|
| d3 |
175 mm
|
Outside diameter |
| B |
22 mm
|
Width |
| d1 |
160 mm
|
Diameter locating side face |
| b |
14 mm
|
Width locating slot |
| h |
6 mm
|
Depth locating slot |
| Axial static load carrying capacity |
430 kN
|
| Mass lock nut |
1.62 kg
|
| Associated spanner |
TMFN 23-30
|
Reviews
There are no reviews yet.