Spherical roller thrust bearings accommodate very heavy axial and considerable radial loads. They have the highest load rating of all thrust bearings, enabling compact, high power density bearing arrangements. By combining two or more spherical roller thrust bearings, it is possible to create a bearing arrangement that is either self-aligning, allowing misalignment of the shaft, or very stiff.
| d |
65 mm
|
Bore diameter |
|---|---|---|
| D |
140 mm
|
Outside diameter |
| H |
45 mm
|
Height |
| d1 |
≈ 120 mm
|
Outside diameter of shaft washer end side face |
| D1 |
≈ 91.5 mm
|
Shoulder diameter outer ring |
| B |
29.5 mm
|
Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a stamped steel cage) |
| B1 |
39.8 mm
|
Height shaft washer + cage |
| C |
22 mm
|
Height housing washer |
| s |
42 mm
|
Distance from shaft washer end side face to pressure point |
| r1,2 |
min. 2 mm
|
Chamfer dimension shaft washer |
| da |
min. 100 mm
|
Diameter of shaft abutment |
|---|---|---|
| db1 |
max. 72 mm
|
Abutment diameter of spacer ring |
| db2 |
max. 72 mm
|
Outside diameter of spacer ring |
| Da |
max. 117 mm
|
Diameter of housing abutment |
| ra |
max. 2 mm
|
Fillet radius |
| Basic dynamic load rating | C |
455 kN
|
|---|---|---|
| Basic static load rating | C0 |
1 080 kN
|
| Fatigue load limit | Pu |
137 kN
|
| Reference speed |
2 600 r/min
|
|
| Limiting speed |
4 800 r/min
|
|
| Minimum axial load factor | A |
0.11
|
| Mass bearing |
3.2 kg
|
Reviews
There are no reviews yet.