These bearings consist of a radial needle roller bearing combined with a full complement thrust ball bearing. Together they can accommodate both moderate radial loads and lighter axial loads in one direction. Their low cross-sectional height makes the bearings particularly suitable for applications where other types of locating bearing arrangements occupy too much space. The thrust part has a cover with lubrication holes.
| Fw |
7 mm
|
Diameter under rollers |
|---|---|---|
| D |
14 mm
|
Outside diameter |
| C |
18 mm
|
Width |
| C1 |
4.7 mm
|
Distance side face to lubrication hole |
| d |
7 mm
|
Bore diameter of thrust part |
| r1,2 |
min. 0.3 mm
|
Chamfer dimension |
| da |
min. 9.6 mm
|
Diameter of shaft abutment |
|---|---|---|
| Da |
max. 12 mm
|
Diameter of housing abutment |
| Ca |
10 mm
|
Distance side face to back face of snap ring |
| ra |
max. 0.3 mm
|
Radius of fillet |
| Basic dynamic load rating, radial | C |
2.81 kN
|
|---|---|---|
| Basic static load rating, radial | C0 |
2.75 kN
|
| Basic dynamic load rating, axial | C |
3.45 kN
|
| Basic static load rating, axial | C0 |
5 kN
|
| Fatigue load limit, radial | Pu |
0.29 kN
|
| Fatigue load limit, axial | Pu |
0.186 kN
|
| Minimum axial load factor | A |
0.00013
|
| Reference speed |
10 000 r/min
|
|
| Limiting speed |
11 000 r/min
|
| Mass |
0.014 kg
|
Reviews
There are no reviews yet.