AN lock nuts are used to locate bearings onto a shaft. They have inch threads and four, equally spaced slots around their circumference to accommodate a spanner. They should be locked by a lock washer to prevent unintentional loosening. AN lock nuts can be reused, provided they are not damaged.
| G |
199.314 mm
|
Thread size |
|---|---|---|
|
8
|
Threads per inch | |
| d1 |
232.562 mm
|
Diameter locating side face |
| d3 |
max. 250.165 mm
|
Outside diameter |
| B |
30.429 mm
|
Width |
| b |
18.669 mm
|
Width locating slot |
| h |
8.204 mm
|
Depth locating slot |
| Axial load carrying capacity, static |
760 kN
|
| Mass lock nut |
4.11 kg
|
| Associated spanner |
TMFN 30-40
|
Reviews
There are no reviews yet.