AN lock nuts are used to locate bearings onto a shaft. They have inch threads and four, equally spaced slots around their circumference to accommodate a spanner. They should be locked by a lock washer to prevent unintentional loosening. AN lock nuts can be reused, provided they are not damaged.
| G |
109.855 mm
|
Thread size |
|---|---|---|
|
12
|
Threads per inch | |
| d1 |
134.137 mm
|
Diameter locating side face |
| d3 |
max. 145.39 mm
|
Outside diameter |
| B |
20.091 mm
|
Width |
| b |
12.319 mm
|
Width locating slot |
| h |
5.029 mm
|
Depth locating slot |
| Axial load carrying capacity, static |
310 kN
|
| Mass lock nut |
1.08 kg
|
| Associated spanner |
HN 21-22
|
Reviews
There are no reviews yet.