N lock nuts are used to locate bearings onto a shaft. They have inch threads and four, equally spaced slots around their circumference to accommodate a spanner. They should be locked by a lock washer or locking plate to prevent unintentional loosening. N lock nuts can be reused, provided they are not damaged.
| G |
39.7 mm
|
Thread size |
|---|---|---|
|
18
|
Threads per inch | |
| d1 |
50.8 mm
|
Diameter locating side face |
| d3 |
max. 57.277 mm
|
Outside diameter |
| B |
11.379 mm
|
Width |
| b |
6.096 mm
|
Width locating slot |
| h |
2.642 mm
|
Depth locating slot |
| Axial load carrying capacity, static |
77 kN
|
| Mass lock nut |
0.11 kg
|
| Associated spanner |
HN 8-9
|
Reviews
There are no reviews yet.