LGEM 2/5High viscosity bearing grease with solid lubricants

Product weight

5 kg

Recommended applications	Rolling element bearings running at kow speed and very high loads Jaw crushers Crane arms
Suitable for High load applications	++
Suitable for Vertical shaft applications	+
Suitable for applications with Oscilating movements	Ο
Suitable for applications with Severe vibrations	+
Suitable for applications that require Rust protection	+
Suitable for applications that require Water resistance	+
Suitable for applications that require Frequent start-up	++
Speed (max.) n x dm (x 1000)	300
Operating temperature range	-20 – 120 °C
Dropping point (min) ISO 2176	180 °C
Penetration DIN ISO 2137, Worked, 60 strokes (10⁻¹mm)	265 – 295
Penetration DIN ISO 2137, Prolonged (max.), 100 000 strokes, 10⁻¹mm	+50
Mechanical stability – Roll stability, ASTM D1831 (max.) 50 hrs at 80°C, 10⁻¹mm	+50
Mechanical stability, V2F test, 144 hrs	M
Corrosion protection, Emcor, ISO 11007, Distilled water	0-0
Corrosion protection, Emcor, ISO 11007 modified, Water washout	0-0
Corrosion protection, Emcor, ISO 11007 modified, 0.5% NaCl	2-2
Water resistance (max.) DIN 51807/1, 3 hrs at 90 °C	1
Oil separation DIN 51817, 40°C, %	1-5
Lubrication ability, R2F test B at 120°C	Pass at 100°C
Copper corrosion (max.) DIN 51811 /ASTM D4048, 24 hrs at 100°C	2 max.
Rolling bearing grease life (max.) ROF test, L50 life, 10000 r/min, hrs at °C	1000 at 100°C
EP performance – 4 ball – Wear scar (max.) DIN 51350/5, 1400N	1.2 mm
EP performance – 4 ball – Weld load (min.) DIN 51350/4	3 400 N

DIN 51825 code	KPF2K-20
NLGI consistency class	2
Thickener	Lithium/calcium
Colour	Black
Base oil type	Mineral
Base oil viscosity DIN 51562 at 40 °C	500 mm²/s
Base oil viscosity DIN 51562 at 100 °C	32 mm²/s
Shelf life	5 year
Packsize	5 kg can
Available for single point lubrication	yes