Backing bearings have been specially developed for cold rolling mills of the cluster type, but can also be used for other applications, such as straightening or bending machines. These bearings have a particularly thick-walled outer ring and can be mounted on stationary support shafts to form backup or straightening rolls.
| D |
160 mm
|
Outside diameter |
|---|---|---|
| d |
70 mm
|
Bore diameter |
| H |
max. 44.982 mm
|
Section height |
| B |
90 mm
|
Total bearing width over inner ring(s) |
| C |
90 mm
|
Total bearing width over outer ring(s) |
| D1 |
≈ 0 mm
|
Shoulder diameter outer ring/ inner diameter housing washer |
| F |
82.809 mm
|
Raceway diameter inner ring |
| E |
108.85 mm
|
Raceway diameter outer ring |
| r |
min. 1 mm
|
Chamfer dimension outer ring |
| K |
5 mm
|
Diameter lubrication hole |
|---|---|---|
|
4
|
Number of holes |
| Basic dynamic load rating | C |
358 kN
|
|---|---|---|
| Basic static load rating | C0 |
585 kN
|
| Fatigue load limit | Pu |
80 kN
|
| Maximum dynamic radial loads | Fr |
max. 315 kN
|
| Maximum static radial loads | F0r |
max. 455 kN
|
| Mass bearing |
10.7 kg
|
Reviews
There are no reviews yet.