MD 125X100X32-LCompact piston seal with guide rings, anti-extrusion rings and seal integrated into the piston seal assembly
MD-L seals are compact, double-acting piston seals. They have a nitrile rubber sealing ring with a polyester elastomer anti-extrusion rings and polyacetal guide rings on both sides. The anti-extrusion rings provide improved high pressure performance by reducing the likelihood of gap extrusion. The integral guide rings do not require additional external piston guide rings. The anti-extrusion and guide rings are split for easy installation.
Dimensions
| D |
125 mm
|
Cylinder bore diameter |
|---|---|---|
| D1 |
123 mm
|
Piston outside diameter |
| D2 |
119 mm
|
Additional groove diameter |
| d |
100 mm
|
Piston groove diameter |
| L |
32 mm
|
Piston groove width |
| L2 |
10 mm
|
Additional groove width |
| S |
12.5 mm
|
Radial depth |
| R |
max. 0.8 mm
|
Groove radius |
| C |
min. 6.5 mm
|
Lead-in chamfer length |
| tol D |
0.1 mm
|
Upper limit deviation |
|---|---|---|
|
0 mm
|
Lower limit deviation | |
|
H9
|
Tolerance class for cylinder bore diameter | |
| tol D1 |
h11
|
Tolerance class for piston outside diameter |
| tol D2 |
h9
|
Tolerance class for additional groove diameter |
| tol d |
0 mm
|
Upper limit deviation |
|
-0.087 mm
|
Lower limit deviation | |
|
h9
|
Tolerance class for piston groove diameter | |
| tol L |
0.35 mm
|
Upper limit deviation |
|
0.1 mm
|
Lower limit deviation | |
| tol L2 |
0.1 mm
|
Upper limit deviation |
|
0 mm
|
Lower limit deviation |
Pressure and speed
| Pressure |
max. 250 bar
|
| Speed |
max. 1 m/s
|
Operating temperature
| T6 |
max. 120 °C
|
Extreme upper temperature limit |
|---|---|---|
| T5 |
max. 110 °C
|
Reduced performance upper temperature limit |
| T4 |
max. 110 °C
|
Upper operating temperature limit |
| T3 |
min. -20 °C
|
Lower operating temperature limit |
| T2 |
min. -25 °C
|
Reduced performance lower temperature limit |
| T1 |
min. -40 °C
|
Extreme lower temperature limit |
|
Maximum values of application parameters (e.g. pressure, speed, temperature, e-gap) should not be applied continuously nor simultaneously.
|
||
Materials
| Primary sealing element |
Nitrile Rubber (N80/047)
|
| Additional element |
Acetal (POM POM/076)
|
| Additional element |
Polyester (TPC-ET72/075)
|
Compliance with standard
| In accordance with |
ISO 6547
|
Related products
-
SCP3-6000-E5DStep cut piston seal with rigid cap and rubber energizer
SCP seals are inch sized, double-acting piston seals with a rigid, glass fibre reinforced polyamide slide ring and an oval nitrile rubber energizer. The slide ring has high resistance to wear and gap extrusion and provides low friction, even at high pressures. It is step cut for easy installation.View product
-
SCP3-6000-E5EStep cut piston seal with rigid cap and rubber energizer
SCP seals are inch sized, double-acting piston seals with a rigid, glass fibre reinforced polyamide slide ring and an oval nitrile rubber energizer. The slide ring has high resistance to wear and gap extrusion and provides low friction, even at high pressures. It is step cut for easy installation.View product
-
SCP2-4750-E5EStep cut piston seal with rigid cap and rubber energizer
SCP seals are inch sized, double-acting piston seals with a rigid, glass fibre reinforced polyamide slide ring and an oval nitrile rubber energizer. The slide ring has high resistance to wear and gap extrusion and provides low friction, even at high pressures. It is step cut for easy installation.View product
-
SCP3-3000-E5DStep cut piston seal with rigid cap and rubber energizer
SCP seals are inch sized, double-acting piston seals with a rigid, glass fibre reinforced polyamide slide ring and an oval nitrile rubber energizer. The slide ring has high resistance to wear and gap extrusion and provides low friction, even at high pressures. It is step cut for easy installation.View product
Reviews
There are no reviews yet.