DPV-210-K0MHeavy duty rubber-energized polyurethane piston seal
DPV seals are inch sized, double-acting piston seals with a polyurethane slide ring and a rectangular nitrile rubber energizer. The wear-resistant slide ring has a profiled sealing surface, optimized to reduce friction and resist gap extrusion. Notches in the slide ring edges enable rapid pressurization of the seal to react quickly to changes in pressure and direction. These profiles can usually be installed without special equipment.
Dimensions
| D |
25.4 mm
|
Cylinder bore diameter |
|---|---|---|
| d |
19.25 mm
|
Piston groove diameter |
| L |
4.75 mm
|
Piston groove width |
| S |
3.07 mm
|
Radial depth |
| R |
max. 0.51 mm
|
Groove radius |
| C |
min. 3.18 mm
|
Lead-in chamfer length |
| tol D |
0.05 mm
|
Upper limit deviation |
|---|---|---|
|
0 mm
|
Lower limit deviation | |
| tol d |
0 mm
|
Upper limit deviation |
|
-0.05 mm
|
Lower limit deviation | |
| tol L |
0.127 mm
|
Upper limit deviation |
|
0 mm
|
Lower limit deviation |
Maximum extrusion gap
| Reference temperature for extrusion gap |
80 °C
|
|
| Extrusion gap at 160 bar | e |
0.3 mm
|
| Extrusion gap at 250 bar | e |
0.2 mm
|
Pressure and speed
| Pressure |
max. 400 bar
|
| Speed |
max. 1 m/s
|
Operating temperature
| T6 |
max. 130 °C
|
Extreme upper temperature limit |
|---|---|---|
| T5 |
max. 120 °C
|
Reduced performance upper temperature limit |
| T4 |
max. 110 °C
|
Upper operating temperature limit |
| T3 |
min. -20 °C
|
Lower operating temperature limit |
| T2 |
min. -30 °C
|
Reduced performance lower temperature limit |
| T1 |
min. -40 °C
|
Extreme lower temperature limit |
|
Maximum values of application parameters (e.g. pressure, speed, temperature, e-gap) should not be applied continuously nor simultaneously.
|
||
Materials
| Primary sealing element |
Polyurethane (X-ECOPUR PS)
|
| Additional element |
Nitrile Rubber (NBR A-8501)
|
Related products
-
SCP3-8500-E5DStep cut piston seal with rigid cap and rubber energizer
SCP seals are inch sized, double-acting piston seals with a rigid, glass fibre reinforced polyamide slide ring and an oval nitrile rubber energizer. The slide ring has high resistance to wear and gap extrusion and provides low friction, even at high pressures. It is step cut for easy installation.View product
-
SCP3-6025-E5DStep cut piston seal with rigid cap and rubber energizer
SCP seals are inch sized, double-acting piston seals with a rigid, glass fibre reinforced polyamide slide ring and an oval nitrile rubber energizer. The slide ring has high resistance to wear and gap extrusion and provides low friction, even at high pressures. It is step cut for easy installation.View product
-
SCP3-5500-E5DStep cut piston seal with rigid cap and rubber energizer
SCP seals are inch sized, double-acting piston seals with a rigid, glass fibre reinforced polyamide slide ring and an oval nitrile rubber energizer. The slide ring has high resistance to wear and gap extrusion and provides low friction, even at high pressures. It is step cut for easy installation.View product
-
SCP4-10000-E5DStep cut piston seal with rigid cap and rubber energizer
SCP seals are inch sized, double-acting piston seals with a rigid, glass fibre reinforced polyamide slide ring and an oval nitrile rubber energizer. The slide ring has high resistance to wear and gap extrusion and provides low friction, even at high pressures. It is step cut for easy installation.View product
Reviews
There are no reviews yet.