MCW-120X136X9-E6QPolyurethane press-in wiper seal with a single lip and a steel retaining ring
Hydraulic wiper seals prevent contaminants from entering a cylinder assembly and hydraulic system. MCW seals are polyurethane press-in wiper seals with a steel retaining ring. They have an effective, single wiping lip that sits flush with the cylinder head. This design allows compact arrangements when the cylinder is retracted.
Dimensions
| d |
120 mm
|
Rod diameter |
|---|---|---|
| D |
136 mm
|
Housing groove diameter |
| L |
9.5 mm
|
Housing groove width |
| S |
8 mm
|
Radial depth |
| R |
max. 0.8 mm
|
Groove radius |
| C |
min. 8.5 mm
|
Lead-in chamfer length on rod |
| C1 |
min. 0.7 mm
|
Lead-in chamfer length in housing |
| C1 |
max. 1 mm
|
Lead-in chamfer length in housing |
|
tol d Tolerance for rod diameter is determined by the rod seal.
|
||
| tol D |
0.063 mm
|
Upper limit deviation |
|---|---|---|
|
0 mm
|
Lower limit deviation | |
|
H8
|
Tolerance class for housing diameter | |
| tol L |
0.5 mm
|
Upper limit deviation |
|
0 mm
|
Lower limit deviation | |
Materials
| Primary sealing element |
Polyurethane (TPU U-1029)
|
Operating conditions
| Speed |
max. 1.5 m/s
|
|
| Temperature |
min. -40 °C
|
|
| Temperature |
max. 120 °C
|
|
|
Maximum values of application parameters (e.g. pressure, speed, temperature) should not be applied continuously nor simultaneously.
|
||
Related products
-
DTW-110X120X7-J2GPolyurethane snap-in wiper seal with a single lip, two additional static lips andDTW-110X120X7-J2GPolyurethane snap-in wiper seal with a single lip, two additional static lips and notches on the inside edge
Hydraulic wiper seals prevent contaminants from entering a cylinder assembly and hydraulic system. DTW seals are polyurethane snap-in wiper seals. They have a single-lip design, with two additional radial and axial static seal lips that maintain the sealing contact and keep the wiper tight in the housing. Notches on the inside edge prevent the seals from trapping in pressure or being pushed out by pressure.View product
-
DTW-1312-J2GPolyurethane snap-in wiper seal with a single lip, two additional static lips and notcDTW-1312-J2GPolyurethane snap-in wiper seal with a single lip, two additional static lips and notches on the inside edge
Hydraulic wiper seals prevent contaminants from entering a cylinder assembly and hydraulic system. DTW seals are polyurethane snap-in wiper seals. They have a single-lip design, with two additional radial and axial static seal lips that maintain the sealing contact and keep the wiper tight in the housing. Notches on the inside edge prevent the seals from trapping in pressure or being pushed out by pressure.View product
-
DTW-1562-J2GPolyurethane snap-in wiper seal with a single lip, two additional static lips and notcDTW-1562-J2GPolyurethane snap-in wiper seal with a single lip, two additional static lips and notches on the inside edge
Hydraulic wiper seals prevent contaminants from entering a cylinder assembly and hydraulic system. DTW seals are polyurethane snap-in wiper seals. They have a single-lip design, with two additional radial and axial static seal lips that maintain the sealing contact and keep the wiper tight in the housing. Notches on the inside edge prevent the seals from trapping in pressure or being pushed out by pressure.View product
-
DTW-145X158X8-J2GPolyurethane snap-in wiper seal with a single lip, two additional static lips andDTW-145X158X8-J2GPolyurethane snap-in wiper seal with a single lip, two additional static lips and notches on the inside edge
Hydraulic wiper seals prevent contaminants from entering a cylinder assembly and hydraulic system. DTW seals are polyurethane snap-in wiper seals. They have a single-lip design, with two additional radial and axial static seal lips that maintain the sealing contact and keep the wiper tight in the housing. Notches on the inside edge prevent the seals from trapping in pressure or being pushed out by pressure.View product
Reviews
There are no reviews yet.