470950V-ring seal
V-ring seals (or V-rings) are all-rubber seals with a wide range of applications. The seals are used to protect bearings from contamination or as secondary seals to protect primary seals in highly contaminated environments. They are a cost-effective and easy to install contaminant barrier for all kind of shafts. They are available in nitrile rubber and also in fluoro rubber for higher temperatures.
| Seal design |
VR5
|
| Lip material |
Nitrile rubber (NBR)
|
Dimensions
| d1 |
over 944 mm
|
Shaft diameter range (over) |
|---|---|---|
| d1 |
incl. 955 mm
|
Shaft diameter range (incl.) |
| d |
911 mm
|
Seal inside diameter, free state |
|---|---|---|
| b |
100 mm
|
Nominal seal width |
| b1 |
67.5 mm
|
Seal seat width |
| c |
13 mm
|
Nominal seal height |
| 2 x |
24 mm
|
Radial gap |
| 2 y |
115 mm
|
Radial distance |
| B1 |
85 mm
|
Seal fitted width |
|
± 12 mm
|
Tolerance seal fitted width |
Application and operating conditions
| Operating temperature |
max. 100 °C
|
| Operating temperature |
min. -40 °C
|
Related products
-
400065V-ring seal, VR2 design, North American standard, interchangeable with VS design
V-ring seals (V-rings) are all-rubber, axial shaft seals. They offer an easy-to-install solution for rotating shaft applications, including use as a secondary seal in highly contaminated environments. The VR2 design includes a standard low cross section with a tapered back side face and a wide seal body, providing a firm hold on the shaft. VR2 seals are commonly used in agricultural and automotive applications.View product
-
400051V-ring seal, VR2 design, North American standard, interchangeable with VS design
V-ring seals (V-rings) are all-rubber, axial shaft seals. They offer an easy-to-install solution for rotating shaft applications, including use as a secondary seal in highly contaminated environments. The VR2 design includes a standard low cross section with a tapered back side face and a wide seal body, providing a firm hold on the shaft. VR2 seals are commonly used in agricultural and automotive applications.View product
-
400071V-ring seal, VR2 design, North American standard, interchangeable with VS design
V-ring seals (V-rings) are all-rubber, axial shaft seals. They offer an easy-to-install solution for rotating shaft applications, including use as a secondary seal in highly contaminated environments. The VR2 design includes a standard low cross section with a tapered back side face and a wide seal body, providing a firm hold on the shaft. VR2 seals are commonly used in agricultural and automotive applications.View product
-
400054V-ring seal, VR1 design, North American standard, interchangeable with VA design
V-ring seals (V-rings) are all-rubber, axial shaft seals. They offer an easy-to-install solution for rotating shaft applications, including use as a secondary seal in highly contaminated environments. The VR1 design includes a standard cross section with a straight back side face. Being the most common type of V-rings, VR1 seals are typically used to protect bearing arrangements in gearboxes, electric motors and drives.View product
Reviews
There are no reviews yet.