UNP-45X35X7-E6WSingle-acting polyurethane piston U-cup seal
UNP seals are single-acting U-cup seals made of thermoplastic polyurethane. They may be used in double-acting cylinders when using two seals in a back-to-back arrangement.
Dimensions
| D |
45 mm
|
Cylinder bore diameter |
|---|---|---|
| d |
35 mm
|
Piston groove diameter |
| L |
7 mm
|
Piston groove width |
| L+H |
9 mm
|
Additional groove width |
| H |
6 mm
|
Nominal seal width |
| S |
5 mm
|
Radial depth |
| R |
max. 0.4 mm
|
Groove radius |
| C |
min. 5 mm
|
Lead-in chamfer length |
| tol D |
0.062 mm
|
Upper limit deviation |
|---|---|---|
|
0 mm
|
Lower limit deviation | |
|
H9
|
Tolerance class for cylinder bore diameter | |
| tol d |
0 mm
|
Upper limit deviation |
|
-0.062 mm
|
Lower limit deviation | |
|
h9
|
Tolerance class for piston groove diameter | |
| tol L |
0.2 mm
|
Upper limit deviation |
|
0 mm
|
Lower limit deviation | |
| tol L+B |
0.2 mm
|
Upper limit deviation |
|
0 mm
|
Lower limit deviation |
Maximum extrusion gap
| Reference temperature for extrusion gap |
80 °C
|
|
| Extrusion gap at 160 bar | e |
0.45 mm
|
| Extrusion gap at 250 bar | e |
0.25 mm
|
| Extrusion gap at 350 bar | e |
0.1 mm
|
Pressure and speed
| Pressure |
max. 350 bar
|
| Speed at pressure ≤ 250 bar |
1 m/s
|
| Speed at pressure ≤ 350 bar |
0.5 m/s
|
Operating temperature
| T6 |
max. 130 °C
|
Extreme upper temperature limit |
|---|---|---|
| T5 |
max. 120 °C
|
Reduced performance upper temperature limit |
| T4 |
max. 110 °C
|
Upper operating temperature limit |
| T3 |
min. -30 °C
|
Lower operating temperature limit |
| T2 |
min. -40 °C
|
Reduced performance lower temperature limit |
| T1 |
min. -60 °C
|
Extreme lower temperature limit |
|
Maximum values of application parameters (e.g. pressure, speed, temperature, e-gap) should not be applied continuously nor simultaneously.
|
||
Materials
| Primary sealing element |
Polyurethane (TPU U-1029)
|
Related products
-
SCP3-5500-E5DStep cut piston seal with rigid cap and rubber energizer
SCP seals are inch sized, double-acting piston seals with a rigid, glass fibre reinforced polyamide slide ring and an oval nitrile rubber energizer. The slide ring has high resistance to wear and gap extrusion and provides low friction, even at high pressures. It is step cut for easy installation.View product
-
SCP2-5000-E5EStep cut piston seal with rigid cap and rubber energizer
SCP seals are inch sized, double-acting piston seals with a rigid, glass fibre reinforced polyamide slide ring and an oval nitrile rubber energizer. The slide ring has high resistance to wear and gap extrusion and provides low friction, even at high pressures. It is step cut for easy installation.View product
-
SCP3-5500-E5EStep cut piston seal with rigid cap and rubber energizer
SCP seals are inch sized, double-acting piston seals with a rigid, glass fibre reinforced polyamide slide ring and an oval nitrile rubber energizer. The slide ring has high resistance to wear and gap extrusion and provides low friction, even at high pressures. It is step cut for easy installation.View product
-
SCP3-5000-E5DStep cut piston seal with rigid cap and rubber energizer
SCP seals are inch sized, double-acting piston seals with a rigid, glass fibre reinforced polyamide slide ring and an oval nitrile rubber energizer. The slide ring has high resistance to wear and gap extrusion and provides low friction, even at high pressures. It is step cut for easy installation.View product
Reviews
There are no reviews yet.