7218 CD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

SKU: 7218 CD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular co

These matched sets of two super-precision, high-capacity, D design, single row angular contact ball bearings are available in a variety of arrangements. They are designed for high-load capacity and relatively high speed operation and, compared to the equivalent SKF B and E design high-speed bearings, are best suited for heavier loads.

ID:144130

Universal matching bearing(s)
Yes, back-to-back (<>), face-to-face (><) or tandem (>>)

Dimensions - 7218 CD/HCP4ADGA

Dimensions

d
90 mm
Bore diameter
D
160 mm
Outside diameter
B
60 mm
Width
d1
111.6 mm
Shoulder diameter of inner ring (large side face)
d2
111.6 mm
Shoulder diameter of inner ring (small side face)
D1
138.4 mm
Shoulder diameter of outer ring (large side face)
r1,2
min. 2 mm
Chamfer dimension
r3,4
min. 1 mm
Chamfer dimension

Abutment dimensions - 7218 CD/HCP4ADGAAbutment dimensions - 7218 CD/HCP4ADGA

Abutment dimensions

da
min. 101 mm
Diameter of shaft abutment
db
min. 101 mm
Diameter of shaft abutment
Da
max. 149 mm
Diameter of housing abutment
Db
max. 154.4 mm
Diameter of housing abutment
ra
max. 2 mm
Radius of fillet
rb
max. 1 mm
Radius of fillet
dn
117.5 mm
Position of oil nozzle

Calculation data

Basic dynamic load rating C
208 000 N
Basic static load rating C0
224 000 N
Fatigue load limit Pu
6 200 N
Attainable speeds
Contact SKF for the attainable speeds
Contact angle α
15 °
Ball diameter Dw
22.225 mm
Number of rows i
2
Number of balls (per bearing) z
16
Reference grease quantity (per bearing) Gref
27.765 cm³
Preload and stiffness (back-to-back, face-to-face)
Preload class
A
Preload G
480 N
Axial stiffness
126 N/µm
Correction factors for preload calculation
Correction factor dependent on bearing series and size f
1.09
Correction factor dependent on contact angle f1
1
Correction factor, preload class A f2A
1
Correction factor for hybrid bearings fHC
1.01
Factors for equivalent bearing load calculation
Calculation factor for equivalent loads f0
14.6
Additional factors for equivalent loads
Refer to Notes 1 and 2 below

Mass

Mass
3.67 kg

Reviews

There are no reviews yet.

Be the first to review “7218 CD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings”

Your email address will not be published. Required fields are marked *