These super-precision, high-capacity, single row angular contact ball bearings, with 15° contact angle, with seals, accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They are designed to accommodate heavy loads at relatively high speeds under low to moderate operating temperatures.
| Universal matching bearing(s) |
No
|
| d |
130 mm
|
Bore diameter |
|---|---|---|
| D |
200 mm
|
Outside diameter |
| B |
33 mm
|
Width |
| d1 |
151.6 mm
|
Shoulder diameter of inner ring (large side face) |
| d2 |
151.6 mm
|
Shoulder diameter of inner ring (small side face) |
| D2 |
183 mm
|
Recess diameter of outer ring (large side face) |
| r1,2 |
min. 2 mm
|
Chamfer dimension |
| r3,4 |
min. 1 mm
|
Chamfer dimension |
| a |
38.7 mm
|
Distance from side face to pressure point |
| da |
min. 139 mm
|
Diameter of shaft abutment |
|---|---|---|
| da |
max. 151 mm
|
Diameter of shaft abutment |
| db |
min. 139 mm
|
Diameter of shaft abutment |
| db |
max. 151 mm
|
Diameter of shaft abutment |
| Da |
max. 191 mm
|
Diameter of housing abutment |
| Db |
max. 195 mm
|
Diameter of housing abutment |
| ra |
max. 2 mm
|
Radius of fillet |
| rb |
max. 1 mm
|
Radius of fillet |
| Basic dynamic load rating | C |
148 kN
|
|---|---|---|
| Basic static load rating | C0 |
156 kN
|
| Fatigue load limit | Pu |
5.2 kN
|
| Attainable speed for grease lubrication |
7 000 r/min
|
|
| Contact angle | α |
15 °
|
| Ball diameter | Dw |
22.225 mm
|
| Number of rows | i |
1
|
| Number of balls (per bearing) | z |
21
|
| Preload, class A | GA |
560 N
|
|---|---|---|
| Axial stiffnes for preload A (sets of two brgs back to back or face to face) |
145 N/µm
|
|
| Preload, class B | GB |
1 120 N
|
| Axial stiffness for preload B (sets of two brgs back-to-back or face-to-face) |
198 N/µm
|
|
| Preload, class C | GC |
2 240 N
|
| Axial stiffness for preload C (sets of two brgs back-to-back or face-to-face) |
277 N/µm
|
|
| Preload, class D | GD |
4 480 N
|
| Axial stiffness for preload D (sets of two brgs back-to-back or face-to-face) |
400 N/µm
|
| Correction factor dependent on bearing series and size | f |
1.15
|
|---|---|---|
| Correction factor dependent on contact angle | f1 |
1
|
| Correction factor, preload class A | f2A |
1
|
| Correction factor, preload class B | f2B |
1.02
|
| Correction factor, preload class C | f2C |
1.05
|
| Correction factor, preload class D | f2D |
1.09
|
| Correction factor for hybrid bearings | fHC |
1
|
| Calculation factor for equivalent loads | f0 |
15.6
|
|---|---|---|
| Additional factors for equivalent loads |
Refer to Notes 1 and 2 below
|
| Mass |
3.26 kg
|
Reviews
There are no reviews yet.