S71924 CD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings with seals

SKU: S71924 CD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings with seals

These matched sets of two super-precision, high-capacity, D design, single row angular contact ball bearings with seals are available in a variety of arrangements. They are designed to accommodate heavy loads at relatively high speeds under low to moderate operating temperatures.

ID:140342

Universal matching bearing(s)
Yes, back-to-back (<>), face-to-face (><) or tandem (>>)

Dimensions - S71924 CD/P4ADGA

Dimensions

d
120 mm
Bore diameter
D
165 mm
Outside diameter
B
44 mm
Width
d1
133.9 mm
Shoulder diameter of inner ring (large side face)
d2
133.9 mm
Shoulder diameter of inner ring (small side face)
D2
154.05 mm
Recess diameter of outer ring (large side face)
D4
158.85 mm
Recess diameter outer ring shoulder (small side face)
r1,2
min. 1.1 mm
Chamfer dimension
r3,4
min. 0.6 mm
Chamfer dimension

Abutment dimensions - S71924 CD/P4ADGA

Abutment dimensions

da
min. 126 mm
Diameter of shaft abutment
da
max. 133.3 mm
Diameter of shaft abutment
db
min. 126 mm
Diameter of shaft abutment
db
max. 133.3 mm
Diameter of shaft abutment
Da
max. 159 mm
Diameter of housing abutment
Db
max. 161 mm
Diameter of housing abutment
ra
max. 1 mm
Radius of fillet
rb
max. 0.6 mm
Radius of fillet

Calculation data

Basic dynamic load rating C
125 000 N
Basic static load rating C0
183 000 N
Fatigue load limit Pu
6 400 N
Attainable speeds
Contact SKF for the attainable speeds
Contact angle α
15 °
Ball diameter Dw
14.288 mm
Number of rows i
2
Number of balls (per bearing) z
28
Preload and stiffness (back-to-back, face-to-face)
Preload class
A
Preload G
290 N
Axial stiffness
127 N/µm
Correction factors for preload calculation
Correction factor dependent on bearing series and size f
1.26
Correction factor dependent on contact angle f1
1
Correction factor, preload class A f2A
1
Correction factor for hybrid bearings fHC
1
Factors for equivalent bearing load calculation
Calculation factor for equivalent loads f0
16.5
Additional factors for equivalent loads
Refer to Notes 1 and 2 below

Mass

Mass
2.42 kg

Reviews

There are no reviews yet.

Be the first to review “S71924 CD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings with seals”

Your email address will not be published. Required fields are marked *