SAF 544X7.1/2Split plummer (pillow) block housing without bearing

SKU: SAF 544X7.1/2Split plummer (pillow) block housing without bearing

SAF split plummer (pillow) block housings have a two-piece, cast metal construction with inch dimensions. These housings have been developed to be the best choice for design, quality, robustness, and cost efficiency. SAF housings, when used with SKF bearings, seals and related components, provide a tailored solution to achieve maximum service life and reduce maintenance requirements for rotating equipment.

ID:127701

Dimensions - SAF 544X7.1/2Dimensions - SAF 544X7.1/2Dimensions - SAF 544X7.1/2

Dimensions

Shaft
da
190.5 mm
Shaft diameter
Bearing seat
Da
400 mm
Diameter of bearing seat
G7
Tolerance class of bearing seat diameter
Ca
117.805 mm
Width of bearing seat
H1
241.3 mm
Centre height
Outside dimensions
A1
222.25 mm
Foot width
A2
304.8 mm
Overall width
H
474.663 mm
Overall height
H2
95.25 mm
Foot height
J
min. 628.65 mm
Distance between attachment bolts
J
max. 708.025 mm
Distance between attachment bolts
J1
133.35 mm
Distance between attachment bolts, axial
L
831.85 mm
Overall length
N1
41.275 mm
Width of attachment bolt hole
Threaded holes
R1
130.175 mm
Distance of drain plug from centre
R2
46.831 mm
Height of drain plug position
RG
1-11.5 NPT
Thread of drain hole
PG
1/4-18 NPT
Thread of grease fitting in cap

Recommended safe loads - SAF 544X7.1/2

Recommended safe loads

P60°
423 kN
Safe load at 60° load angle
P90°
254 kN
Safe load at 90° load angle
P120°
160 kN
Safe load at 120° load angle
P150°
145 kN
Safe load at 150° load angle
P180°
173 kN
Safe load at 180° load angle
Pa
113 kN
Safe load, axial

Materials

Housing material
Cast iron
Corrosion protection
Paint – in accordance with ISO 12944-2, corrosivity category C2

Mass

Mass housing
186 kg

Mounting information

Cap bolt
1-8 UNC x 8
Number of cap bolts
4
SAE grade of cap bolt
5
Recommended tightening torque for cap bolts
399.966 N·m
Recommended diameter for attachment bolts G
38.1 mm
Eye bolt
1/2-13 UNC
Number of eyebolts
2
Width of included locating ring
9.728 mm

Reviews

There are no reviews yet.

Be the first to review “SAF 544X7.1/2Split plummer (pillow) block housing without bearing”

Your email address will not be published. Required fields are marked *