SAF split plummer (pillow) block housings have a two-piece, cast metal construction with inch dimensions. These housings have been developed to be the best choice for design, quality, robustness, and cost efficiency. SAF housings, when used with SKF bearings, seals and related components, provide a tailored solution to achieve maximum service life and reduce maintenance requirements for rotating equipment.
| da |
227.013 mm
|
Shaft diameter |
|---|
| Da |
360 mm
|
Diameter of bearing seat |
|---|---|---|
|
G7
|
Tolerance class of bearing seat diameter | |
| Ca |
107.798 mm
|
Width of bearing seat |
| H1 |
209.55 mm
|
Centre height |
| A1 |
203.2 mm
|
Foot width |
|---|---|---|
| A2 |
295.275 mm
|
Overall width |
| H |
419.1 mm
|
Overall height |
| H2 |
85.725 mm
|
Foot height |
| J |
min. 571.5 mm
|
Distance between attachment bolts |
| J |
max. 635 mm
|
Distance between attachment bolts |
| J1 |
127 mm
|
Distance between attachment bolts, axial |
| L |
749.3 mm
|
Overall length |
| N1 |
34.925 mm
|
Width of attachment bolt hole |
| R1 |
122.238 mm
|
Distance of drain plug from centre |
|---|---|---|
| R2 |
46.038 mm
|
Height of drain plug position |
| RG |
1-11.5 NPT
|
Thread of drain hole |
| PG |
1/4-18 NPT
|
Thread of grease fitting in cap |
| P60° |
557 kN
|
Safe load at 60° load angle |
|---|---|---|
| P90° |
334 kN
|
Safe load at 90° load angle |
| P120° |
207 kN
|
Safe load at 120° load angle |
| P150° |
185 kN
|
Safe load at 150° load angle |
| P180° |
222 kN
|
Safe load at 180° load angle |
| Pa |
145 kN
|
Safe load, axial |
| Housing material |
Cast steel
|
| Corrosion protection |
Paint – in accordance with ISO 12944-2, corrosivity category C2
|
| Mass housing |
197 kg
|
| Cap bolt |
1-1/4-7 UNC x 7
|
|
| Number of cap bolts |
4
|
|
| SAE grade of cap bolt |
8
|
|
| Recommended tightening torque for cap bolts |
2 467.589 N·m
|
|
| Recommended diameter for attachment bolts | G |
31.75 mm
|
| Eye bolt |
1/2-13 UNC
|
|
| Number of eyebolts |
2
|
Reviews
There are no reviews yet.