SAF split plummer (pillow) block housings have a two-piece, cast metal construction with inch dimensions. These housings have been developed to be the best choice for design, quality, robustness, and cost efficiency. SAF housings, when used with SKF bearings, seals and related components, provide a tailored solution to achieve maximum service life and reduce maintenance requirements for rotating equipment.
| da |
131.763 mm
|
Shaft diameter |
|---|
| Da |
270 mm
|
Diameter of bearing seat |
|---|---|---|
|
G7
|
Tolerance class of bearing seat diameter | |
| Ca |
106 mm
|
Width of bearing seat |
| H1 |
160.325 mm
|
Centre height |
| A1 |
158.75 mm
|
Foot width |
|---|---|---|
| A2 |
215.9 mm
|
Overall width |
| H |
320.675 mm
|
Overall height |
| H2 |
63.5 mm
|
Foot height |
| J |
min. 431.8 mm
|
Distance between attachment bolts |
| J |
max. 463.55 mm
|
Distance between attachment bolts |
| J1 |
95.25 mm
|
Distance between attachment bolts, axial |
| L |
539.75 mm
|
Overall length |
| N1 |
28.575 mm
|
Width of attachment bolt hole |
| R1 |
95.25 mm
|
Distance of drain plug from centre |
|---|---|---|
| R2 |
39.688 mm
|
Height of drain plug position |
| RG |
3/4-14 NPT
|
Thread of drain hole |
| PG |
1/4-18 NPT
|
Thread of grease fitting in cap |
| P60° |
414 kN
|
Safe load at 60° load angle |
|---|---|---|
| P90° |
248 kN
|
Safe load at 90° load angle |
| P120° |
157 kN
|
Safe load at 120° load angle |
| P150° |
144 kN
|
Safe load at 150° load angle |
| P180° |
173 kN
|
Safe load at 180° load angle |
| Pa |
112 kN
|
Safe load, axial |
| Housing material |
Spheroidal graphite cast iron
|
| Corrosion protection |
Paint – in accordance with ISO 12944-2, corrosivity category C2
|
| Mass housing |
66.2 kg
|
| Cap bolt |
3/4-10 UNC x 5-1/2
|
|
| Number of cap bolts |
4
|
|
| SAE grade of cap bolt |
8
|
|
| Recommended tightening torque for cap bolts |
515.211 N·m
|
|
| Recommended diameter for attachment bolts | G |
25.4 mm
|
| Eye bolt |
3/8-16 UNC
|
|
| Number of eyebolts |
2
|
Reviews
There are no reviews yet.