SAF split plummer (pillow) block housings have a two-piece, cast metal construction with inch dimensions. These housings have been developed to be the best choice for design, quality, robustness, and cost efficiency. SAF housings, when used with SKF bearings, seals and related components, provide a tailored solution to achieve maximum service life and reduce maintenance requirements for rotating equipment.
| da |
125.413 mm
|
Shaft diameter |
|---|
| Da |
250 mm
|
Diameter of bearing seat |
|---|---|---|
|
G7
|
Tolerance class of bearing seat diameter | |
| Ca |
97.815 mm
|
Width of bearing seat |
| H1 |
152.4 mm
|
Centre height |
| A1 |
149.225 mm
|
Foot width |
|---|---|---|
| A2 |
231.775 mm
|
Overall width |
| H |
298.45 mm
|
Overall height |
| H2 |
60.325 mm
|
Foot height |
| J |
min. 406.4 mm
|
Distance between attachment bolts |
| J |
max. 434.975 mm
|
Distance between attachment bolts |
| J1 |
85.725 mm
|
Distance between attachment bolts, axial |
| L |
511.175 mm
|
Overall length |
| N1 |
28.575 mm
|
Width of attachment bolt hole |
| R1 |
87.313 mm
|
Distance of drain plug from centre |
|---|---|---|
| R2 |
38.1 mm
|
Height of drain plug position |
| Housing material |
Cast iron
|
| Corrosion protection |
Paint – in accordance with ISO 12944-2, corrosivity category C2
|
| Mass housing |
65.3 kg
|
| Number of cap bolts |
4
|
|
| SAE grade of cap bolt |
5
|
|
| Recommended diameter for attachment bolts | G |
25.4 mm
|
| Number of eyebolts |
0
|
|
| Width of included locating ring |
9.728 mm
|
Reviews
There are no reviews yet.