SAFS 216-11Split plummer (pillow) block housing without bearing

SKU: SAFS 216-11Split plummer (pillow) block housing without bearing

SAF split plummer (pillow) block housings have a two-piece, cast metal construction with inch dimensions. These housings have been developed to be the best choice for design, quality, robustness, and cost efficiency. SAF housings, when used with SKF bearings, seals and related components, provide a tailored solution to achieve maximum service life and reduce maintenance requirements for rotating equipment.

ID:127155

Dimensions - SAFS 216-11Dimensions - SAFS 216-11Dimensions - SAFS 216-11

Dimensions

Shaft
db
92.075 mm
Shaft diameter
dc
76.2 mm
Shaft diameter
Bearing seat
Da
140 mm
Diameter of bearing seat
G7
Tolerance class of bearing seat diameter
Ca
42.799 mm
Width of bearing seat
H1
88.9 mm
Centre height
Outside dimensions
A1
88.9 mm
Foot width
A2
133.35 mm
Overall width
H
174.625 mm
Overall height
H2
31.75 mm
Foot height
J
min. 244.475 mm
Distance between attachment bolts
J
max. 279.4 mm
Distance between attachment bolts
J1
53.975 mm
Distance between attachment bolts, axial
L
330.2 mm
Overall length
N1
20.638 mm
Width of attachment bolt hole
Threaded holes
R1
53.975 mm
Distance of drain plug from centre
R2
23.813 mm
Height of drain plug position
RG
3/8-18 NPT
Thread of drain hole
PG
1/8-27 NPT
Thread of grease fitting in cap

Recommended safe loads - SAFS 216-11

Recommended safe loads

P60°
138 kN
Safe load at 60° load angle
P90°
82.7 kN
Safe load at 90° load angle
P120°
49.8 kN
Safe load at 120° load angle
P150°
44.5 kN
Safe load at 150° load angle
P180°
52.5 kN
Safe load at 180° load angle
Pa
34.1 kN
Safe load, axial

Materials

Housing material
Cast steel
Corrosion protection
Paint – in accordance with ISO 12944-2, corrosivity category C2

Mass

Mass housing
17.2 kg

Mounting information

Cap bolt
5/8-11 UNC x 3-1/4
Number of cap bolts
2
SAE grade of cap bolt
8
Recommended tightening torque for cap bolts
298.28 N·m
Recommended diameter for attachment bolts G
15.875 mm
Width of included locating ring
9.728 mm

Reviews

There are no reviews yet.

Be the first to review “SAFS 216-11Split plummer (pillow) block housing without bearing”

Your email address will not be published. Required fields are marked *