FSAF 313Split plummer (pillow) block housing without bearing

SKU: FSAF 313Split plummer (pillow) block housing without bearing

SAF split plummer (pillow) block housings have a two-piece, cast metal construction with inch dimensions. These housings have been developed to be the best choice for design, quality, robustness, and cost efficiency. SAF housings, when used with SKF bearings, seals and related components, provide a tailored solution to achieve maximum service life and reduce maintenance requirements for rotating equipment.

ID:127122

Dimensions - FSAF 313Dimensions - FSAF 313Dimensions - FSAF 313

Dimensions

Shaft
db
77.788 mm
Shaft diameter
dc
61.913 mm
Shaft diameter
Bearing seat
Da
140 mm
Diameter of bearing seat
G7
Tolerance class of bearing seat diameter
Ca
57.785 mm
Width of bearing seat
H1
88.9 mm
Centre height
Outside dimensions
A1
88.9 mm
Foot width
A2
134.938 mm
Overall width
H
167.481 mm
Overall height
H2
31.75 mm
Foot height
J
min. 244.475 mm
Distance between attachment bolts
J
max. 279.4 mm
Distance between attachment bolts
J1
53.975 mm
Distance between attachment bolts, axial
L
330.2 mm
Overall length
N1
17.463 mm
Width of attachment bolt hole
Threaded holes
R1
53.181 mm
Distance of drain plug from centre
R2
21.431 mm
Height of drain plug position
RG
3/8-18 NPT
Thread of drain hole
PG
1/8-27 NPT
Thread of grease fitting in cap

Recommended safe loads - FSAF 313

Recommended safe loads

P60°
60.5 kN
Safe load at 60° load angle
P90°
36 kN
Safe load at 90° load angle
P120°
21.8 kN
Safe load at 120° load angle
P150°
19.6 kN
Safe load at 150° load angle
P180°
23.1 kN
Safe load at 180° load angle
Pa
15 kN
Safe load, axial

Materials

Housing material
Cast iron
Corrosion protection
Paint – in accordance with ISO 12944-2, corrosivity category C2

Mass

Mass housing
13.2 kg

Mounting information

Cap bolt
5/8-11 UNC x 3-1/2
Number of cap bolts
2
SAE grade of cap bolt
8
Recommended tightening torque for cap bolts
298.28 N·m
Recommended diameter for attachment bolts G
15.875 mm
Width of included locating ring
9.728 mm

Reviews

There are no reviews yet.

Be the first to review “FSAF 313Split plummer (pillow) block housing without bearing”

Your email address will not be published. Required fields are marked *