The combination of SKF housings, bearings and accessories is an excellent choice for a customized, reliable and sustainable solution for your shaft arrangement. SKF has a wide range of high-quality housing designs and sizes to meet your specific challenge – including specially designed housings for special applications. The bearings reflect SKF’s state-of-the-art technology, providing the highest-quality bearings. You need to buy each part in the combination separately.</s
| da |
500 mm
|
Shaft diameter |
|---|---|---|
| db |
530 mm
|
Shaft diameter |
| d2 |
675 mm
|
Diameter of taconite seal |
| Ca |
226 mm
|
Width of bearing seat |
| Da |
720 mm
|
Diameter of bearing seat |
| A |
460 mm
|
Width |
| A1 |
430 mm
|
Foot width |
| ATS |
470 mm
|
Width across labyrinth seals |
| ATK |
590 mm
|
Width across taconite seals |
| H |
835 mm
|
Height |
| H1 |
420 mm
|
Centre height of bearing seat |
| H2 |
135 mm
|
Foot height |
| J |
1 030 mm
|
Distance between attachment bolts |
| J1 |
260 mm
|
Distance between attachment bolts |
| L |
1 220 mm
|
Length |
| N |
60 mm
|
Length of attachment bolt hole |
| N1 |
48 mm
|
Width of attachment bolt hole |
| s |
35 mm
|
Offset between housing and bearing centre line |
| ba |
min. 174 mm
|
Distance bearing centre line to shaft end |
|---|---|---|
| ba |
max. 238 mm
|
Distance bearing centre line to shaft end |
| bb |
168.5 mm
|
Distance bearing centre line to side face of lock nut |
| bc |
243.5 mm
|
Distance bearing centre line to end cover |
| J6 |
1 120 mm
|
Distance between dowel pins |
|---|---|---|
| N4 |
max. 35 mm
|
Diameter of dowel pins |
| P0° |
8 000 kN
|
Breaking load |
|---|---|---|
| P55° |
10 000 kN
|
Breaking load |
| P90° |
4 800 kN
|
Breaking load |
| P120° |
3 600 kN
|
Breaking load |
| P150° |
3 100 kN
|
Breaking load |
| P180° |
4 000 kN
|
Breaking load |
| Q120° |
5 800 kN
|
Load carrying ability of cap bolts |
|---|---|---|
| Q150° |
3 350 kN
|
Load carrying ability of cap bolts |
| Q180° |
2 900 kN
|
Load carrying ability of cap bolts |
| Mass housing |
740 kg
|
| Size of cap bolt |
M 42×280
|
|
| Recommended tightening torque for cap bolts |
850 N·m
|
|
| Recommended diameter for attachment bolts | G |
42 mm
|
| Recommended tightening torque for attachment bolts |
3 640 N·m
|
|
| Size of eye bolt |
M 42
|
|
| Initial grease fill, 20% |
11.5 kg
|
|
| Initial grease fill, 40% |
20 kg
|
Reviews
There are no reviews yet.