The combination of SKF housings, bearings and accessories is an excellent choice for a customized, reliable and sustainable solution for your shaft arrangement. SKF has a wide range of high-quality housing designs and sizes to meet your specific challenge – including specially designed housings for special applications. The bearings reflect SKF’s state-of-the-art technology, providing the highest-quality bearings. You need to buy each part in the combination separately.
| Housing | SNL 3140 |
| Labyrinth seal | 2 x TS 40/140 |
| End cover | ETS 40 |
| Bearing | 22332 CCK/W33 |
| Adapter sleeve | H 2332 |
| Locating ring | 2 x FRB 9/340 |
| da |
140 mm
|
Shaft diameter |
|---|---|---|
| Ca |
132 mm
|
Width of bearing seat |
| Da |
340 mm
|
Diameter of bearing seat |
| A |
280 mm
|
Width |
| A1 |
230 mm
|
Foot width |
| ATS |
290 mm
|
Width across labyrinth seals |
| H |
411 mm
|
Height |
| H1 |
210 mm
|
Centre height of bearing seat |
| H2 |
85 mm
|
Foot height |
| J |
510 mm
|
Distance between attachment bolts |
| J1 |
130 mm
|
Distance between attachment bolts |
| L |
610 mm
|
Length |
| N |
42 mm
|
Length of attachment bolt hole |
| N1 |
35 mm
|
Width of attachment bolt hole |
| s |
10 mm
|
Offset between housing and bearing centre line |
| ba |
min. 90 mm
|
Distance bearing centre line to shaft end |
|---|---|---|
| ba |
max. 122 mm
|
Distance bearing centre line to shaft end |
| bb |
85 mm
|
Distance bearing centre line to side face of lock nut |
| bc |
127.5 mm
|
Distance bearing centre line to end cover |
| J6 |
560 mm
|
Distance between dowel pins |
|---|---|---|
| N4 |
max. 20 mm
|
Diameter of dowel pins |
| P0° |
2 600 kN
|
Breaking load |
|---|---|---|
| P55° |
3 200 kN
|
Breaking load |
| P90° |
1 600 kN
|
Breaking load |
| P120° |
1 100 kN
|
Breaking load |
| P150° |
1 000 kN
|
Breaking load |
| P180° |
1 300 kN
|
Breaking load |
| Pa |
840 kN
|
Breaking load |
| Q120° |
1 800 kN
|
Load carrying ability of cap bolts |
|---|---|---|
| Q150° |
1 040 kN
|
Load carrying ability of cap bolts |
| Q180° |
900 kN
|
Load carrying ability of cap bolts |
| Mass housing |
123 kg
|
| Size of cap bolt |
M 24×160
|
|
| Recommended tightening torque for cap bolts |
350 N·m
|
|
| Recommended diameter for attachment bolts | G |
30 mm
|
| Recommended tightening torque for attachment bolts |
1 310 N·m
|
|
| Size of eye bolt |
M 20
|
|
| Initial grease fill, 20% |
1.5 kg
|
|
| Initial grease fill, 40% |
2.3 kg
|
Reviews
There are no reviews yet.