P4BE 100M-TRB-STHPillow block roller bearing unit, four-bolt, type E dimensions, tapered roller bearing insert with set screw locking

SKU: P4BE 100M-TRB-STHPillow block roller bearing unit, four-bolt, type E dimensions, tapered roller bearing insert with set screw locking

Pillow block roller bearing units consist of a tapered roller bearing mounted in a non-split type E dimensions housing that can be bolted to a support surface. This variant has a four-bolt base and set screw locking, holding the shaft firmly against the inner ring of the bearing. The units are sealed and lubricated and ready to use. This assortment of units covers a wide range of requirements, in inch dimensions.

ID:119593

Metric/inch series
Inch
Bearing insert
Tapered roller bearing
Bearing position
Locating
Locking method
Set screws
Bearing housing seal type
Heavy-duty seal

Dimensions - P4BE 100M-TRB-STHDimensions - P4BE 100M-TRB-STH

Dimensions

da
100 mm
Shaft diameter
d2
147.638 mm
Collar outer diameter
A
114.3 mm
Housing foot width
B
158.75 mm
Inner ring width
H
107.95 mm
Height base to center
H1
61.913 mm
Housing foot height
H2
214.313 mm
Housing height
J
min. 311.15 mm
Distance between attachment bolts, max.
J
max. 323.85 mm
Distance between attachment bolts, min.
J
317.5 mm
Distance of attachment bolts
J1
57.15 mm
Axial distance bolt to bolt
L
387.35 mm
Housing length
N
22.225 mm
Width foot slot width
N1
28.575 mm
Length of attachment bolt hole
s
79.375 mm
Centre line unit to side face of inner ring
Grease fitting
GN
1/8-27 NPT
Thread of grease fitting

Calculation data

Basic dynamic load rating C
375 kN
Basic static load rating C0
610 kN
Fatigue load limit Pu
65.5 kN
Comparative radial load rating CF
102 kN
Limiting speed
1 500 r/min
Limiting value e
0.48
Calculation factor Y1
1.4
Calculation factor Y2
2.1
Calculation factor Y0
1.4
Bearing mean diameter dm
129.875 mm
Axial holding force of the locking mechanism Pa
31.1 kN

Mass

Mass bearing unit
35.2 kg

Mounting information

Attachment bolt diameter G
0.75 in
Set screws
5/8-11
Number of set screws
4
Tightening torque for set screws
148.575 N·m
Grease quantity for relubrication
28.3 g

Reviews

There are no reviews yet.

Be the first to review “P4BE 100M-TRB-STHPillow block roller bearing unit, four-bolt, type E dimensions, tapered roller bearing insert with set screw locking”

Your email address will not be published. Required fields are marked *